Tyre Pressure Tips: A Simple Habit That Makes a Big Difference
One of the easiest ways to improve how your eBike feels and performs is also one of the most overlooked: keeping your tyres at the right pressure.
Correct tyre pressure affects comfort, rolling speed, grip, puncture resistance, and even battery range. The good news is that getting it right doesn’t need to be complicated.
1. Check Regularly
Tyres naturally lose air over time. Make it a habit to check pressure at least once a week, and always before longer rides. A quick check with a floor pump or portable gauge takes less than a minute and prevents a lot of frustration later.
2. Look at the Sidewall
Every tyre has a recommended pressure range printed on the sidewall. This is the most important guide. Stay within the range listed by the tyre manufacturer. Going above the recommended maximum can be unsafe, while running below the minimum increases the risk of pinch flats and rim damage.
3. Firmer vs Softer – Finding the Sweet Spot
- Higher pressure (towards the upper end of the recommended range) reduces rolling resistance. This makes the bike feel faster and more efficient on smooth pavement and sealed paths.
- Lower pressure (towards the middle or lower end of the range) gives a more comfortable, responsive ride and better grip, especially on uneven surfaces.
Most riders find a sweet spot somewhere in the middle-to-upper part of the recommended range for everyday riding on roads and pathways. This gives a good balance of speed and comfort without feeling harsh.
A practical starting point
While you should always stay within the range printed on the sidewall of your specific tyres, many riders find a comfortable sweet spot around 40 PSI on our standard-width tyres and closer to 25 PSI on our fat-tyre models. From there, you can fine-tune up or down depending on whether you prioritise speed on pavement or comfort and grip on rougher surfaces.
4. Adjust for Off-Road or Rough Surfaces
If you’re heading onto gravel, dirt paths, or other uneven terrain, let a few PSI out of the tyres (usually 5-10PSI, while still staying within the safe range printed on the sidewall). The slightly softer tyre conforms better to the surface, improving traction and smoothing out bumps. Just remember to pump them back up before returning to regular road riding.
Quick Tips
- Check pressure when the tyres are cold (before riding).
- Use a decent gauge — the ones built into cheap pumps can be inaccurate.
- Heavier riders or those carrying cargo may prefer pressures towards the higher end of the recommended range.
- Under-inflated tyres increase rolling resistance, which can reduce your battery range.
The Bottom Line
You don’t need to obsess over exact numbers. Check the sidewall, stay within the recommended range, and make small adjustments based on where and how you’re riding. A few minutes spent on tyre pressure each week pays off in better comfort, better efficiency, and a more enjoyable ride.
Keep the pressure right, and your VelectriX will feel smoother, roll easier, and look after you better on every trip.